Guitar Lift Medium Black
Designed by: Felix Justen
Specific product features:
Outside dimensions: 37.5 x 22.5 cm
Leg cut: 17.5 cm
Product weight: approx. 390 g
Multifunctional like the big plate, but for smaller guitars and usable as a half plate for larger guitars. Significantly narrower leg cutout, with the same cushion as in big plate or half plate.
Cut to comfortably fit every leg, the GUITARLIFT has a big sponge rubber cushion soft “seat” to perfectly hold the guitar.
Equipped with premium suction cups (50 mm diameter).
Made of Plexiglas ® GS (4 mm, max. external thread: 22.5 x 36.5 cm), individual packed, with large sponge rubber cushion (circular 25 mm, inner dimension 3 mm) leg cutout (17.5 cm), 4 transparent suction cups (diameter 50 mm) with release flap, M4-thread and galvanized steel knurled nut.
With instruction manual.
Foils are ONLY Needed on open-pored surfaces/or mat-lacquered guitars, because air gets under the suction cup through the pores and it then loosens. Oven-porous are oiled, matt lacquered guitars and guitar backs with old, worn lacquer finishes.
This can also apply to French polish, as this type of lacquer is sensitive to moisture (sweat) and to mechanical abrasion. You don’t need foils on a good new French polish.
Please Consult a luthier before choosing to put these on your guitar.
** Set of self-adhesive foil pads are NOT INCLUDED with the GUITARLIFT **
Each case includes a fully assembled Guitarlift® as well as a key and a manual.
*** Adhesive foil pad sets can be ordered separately on our site ***