$199.99
High End Line
HE Big Matt Carbon
For players with a large stature, medium to steep playing posture.
The Big Plate is able to completely shield the back of the guitar against the body, preventing the dampening of the surface as well as the diffusion of perspiration into the wood.
Depending on the design of the guitar, it also acts as a double soundboard.
Full body contact with the support, reachable height 9 to 27 cm.
Maximum Lift 9 inches / 22.86 cm
1 in stock (can be backordered)
Description
Guitarlift
High End Solutions
HE Big Black Matt carbon color
Designed by: Felix Justen
Specific product features:
Outside dimensions: 41 x 26.5 cm
Leg cut: 20 cm
Product weight: approx. 695 g
Cut to comfortably fit every leg, the GUITARLIFT has a big sponge rubber cushion soft “seat” to perfectly hold the guitar
Equipped with premium suction cups (50 mm diameter).
Made of Perspex matt carbon color (6 mm, max. external thread: 26 x 42.5 cm), individual packed, with large sponge rubber cushion (circular 25 mm, inner dimension 3 mm) leg cutout (19.5 cm), 4 transparent suction cups (diameter 50 mm) with release flap, M4-thread and galvanized steel knurled nut.
Please Note:
Foils are ONLY Needed on open-pored surfaces/or mat-lacquered guitars, because air gets under the suction cup through the pores and it then loosens. Oven-porous are oiled, matt lacquered guitars and guitar backs with old, worn lacquer finishes.
This can also apply to French polish, as this type of lacquer is sensitive to moisture (sweat) and to mechanical abrasion. You don’t need foils on a good new French polish.
Please Consult a luthier before choosing to put these on your guitar.
** Set of self-adhesive foil pads are NOT INCLUDED with the GUITARLIFT **
Delivery:
Each case includes a fully assembled Guitarlift® as well as a key and a manual.
*** Adhesive foil pad sets can be ordered separately on our site ***
Additional information
| Weight | 0.795 kg |
|---|---|
| Dimensions | 48 × 33 × 6 cm |
Reviews
There are no reviews yet.